Door Sensor / Window Sensor Price in Saudi Arabia

Door Sensor / Window Sensor Price in Saudi Arabia starts from 350 SAR to 4,500 SAR, depending on the sensor type, wired or wireless technology, magnetic contact design, communication protocol, alarm-panel compatibility, Wi-Fi or smart connectivity, detection features, quantity, brand, model, and installation requirements. Buy quality Door Sensor and Window Sensor solutions from Unity International Services LLC for homes, villas, apartments, offices, shops, warehouses, factories, hotels, schools, restaurants, and other residential or commercial security applications across Saudi Arabia.

Door and Window Sensors are important components of many Intruder Alarm and smart security systems. They can monitor selected doors and windows and report a change of state when the protected opening is opened or closed, depending on the sensor and system configuration.

A properly designed security solution can combine Door/Window Sensors with PIR Motion Detectors, Glass Break Detectors, sirens, alarm control panels, CCTV, and other compatible security devices.

Door Sensor / Window Sensor Price Range in Saudi Arabia

Prices within this category range from approximately 350 SAR to 4,500 SAR, depending on sensor technology, system type, quantity, communication method, smart functions, alarm-panel compatibility, and project requirements.

When comparing products, consider:

• Door or window application

• Wired or wireless technology

• Magnetic contact type

• Alarm-panel compatibility

• Wireless protocol

• Wi-Fi connectivity

• Mobile notification support

• Battery requirements

• Indoor or suitable environmental application

• Installation method

• Number of sensors

• Smart-home integration

• Brand and model

A small apartment may require only a few sensors, while a villa, office, warehouse, or commercial facility can require multiple sensors across several security zones.

What Is a Door Sensor?

A Door Sensor is a security device designed to monitor the state of a selected door.

Many alarm-system Door Sensors use magnetic-contact technology. A typical magnetic sensor consists of two compatible parts positioned on the door and frame.

A simplified operation can be:

Door Closed → Sensor & Magnet Aligned

Door Opens → Magnetic Contact Changes State → Alarm Panel Receives Signal

The system response depends on whether the alarm is armed and how the relevant zone is programmed.

What Is a Window Sensor?

A Window Sensor performs a similar function for compatible windows.

It can be installed to monitor selected accessible windows and communicate a change of state to the connected security system.

A typical configuration can be:

Window Sensor → Alarm Control Panel → Siren / Notification

Window Sensors can form an important part of perimeter security because windows can be potential access points.

Why Use Door and Window Sensors?

Door and Window Sensors provide perimeter monitoring before or when a protected opening changes state.

Potential benefits include:

• Main-door monitoring

• Window monitoring

• Balcony-door monitoring

• Emergency-exit monitoring

• Storage-room protection

• Intruder Alarm integration

• Smart-home applications

• Mobile alerts on supported systems

• Residential and commercial use

They can also work alongside motion and glass-break detection.

Magnetic Door Sensor

A magnetic Door Sensor or magnetic contact is one of the most common devices used in intrusion-alarm systems.

The sensor generally includes:

• Contact component

• Magnet component

When installed correctly, the sensor can identify a change between the closed and open states.

Magnetic contacts are commonly used on:

• Entrance doors

• Office doors

• Storage-room doors

• Emergency exits

• Windows

• Cabinets or other compatible openings in certain applications

The exact installation depends on the sensor design.

Door Sensor for Home

Homes and apartments can use Door Sensors to monitor important entry points.

Potential locations include:

• Main entrance

• Back door

• Balcony door

• Terrace door

• Selected internal security doors

A home security system can combine:

Door Sensors + Window Sensors + PIR Detectors + Alarm Panel + Siren

Smart systems may also provide supported mobile notifications.

Window Sensor for Home

Ground-floor and accessible windows can be included in a residential intrusion-detection plan.

Potential areas include:

• Living-room windows

• Bedroom windows

• Kitchen windows

• Balcony windows

• Ground-floor windows

The number of sensors should be determined according to the property layout.

Door and Window Sensors for Villa

Villas can contain many perimeter access points.

Security planning may include:

• Main entrance

• Side doors

• Rear doors

• Garage access

• Balcony doors

• Ground-floor windows

• Accessible upper-floor windows

• Other selected openings

A multi-zone Intruder Alarm System can organize these sensors according to different parts of the property.

Door Sensor for Office

Offices can use Door Sensors on:

• Main entrance

• Server room

• Accounts room

• Storage room

• Management office

• Emergency exits

• Restricted areas

The sensors can report to a compatible Alarm Control Panel.

Door Sensor for Shop

Retail shops can use Door and Window Sensors as part of their after-hours security system.

A typical shop solution can include:

Door Sensor + Window Sensor + PIR Detector + Glass Break Detector + Alarm Panel + Siren

CCTV can be added for video monitoring and recording.

Door Sensor for Warehouse

Warehouses can have several types of access points, including:

• Main entrance

• Loading doors

• Emergency exits

• Office doors

• Storage-room doors

• Selected windows

Large warehouse doors may require sensors designed for the specific installation and gap requirements.

Always check the selected model's specifications.

Door Sensor for Factory

Factories can use compatible sensors to monitor selected entrances and restricted areas.

Applications may include:

• Main gates or suitable doors

• Office entrances

• Storage rooms

• Technical rooms

• Emergency exits

• Restricted sections

Industrial environments should be assessed carefully before selecting equipment.

Door Sensor for Hotel

Hotels may use Door Sensors as part of selected operational and security systems.

Potential applications can include:

• Administration rooms

• Storage rooms

• Equipment rooms

• Restricted areas

• Selected emergency exits

The sensor and alarm configuration should match the hotel's operational and security requirements.

How to Choose the Right Door Sensor / Window Sensor

Choosing the correct sensor requires understanding the property, opening type, and existing alarm system.

Step 1: Identify the Application

Determine whether the sensor is for:

• Home

• Apartment

• Villa

• Office

• Shop

• Warehouse

• Factory

• Hotel

• School

• Restaurant

• Commercial building

Different environments can require different sensor designs.

Step 2: Count Doors and Windows

Identify every opening that requires monitoring.

For example:

3 Doors + 7 Windows = Up to 10 Sensor Points

The actual quantity depends on which openings are included in the security plan.

Step 3: Choose Wired or Wireless

Wired Door/Window Sensor

Uses compatible physical wiring to connect with an alarm system.

It can be suitable for:

• New buildings

• Offices

• Warehouses

• Factories

• Commercial projects

Wireless Door/Window Sensor

Communicates wirelessly with a compatible alarm panel or hub.

It can be suitable for:

• Apartments

• Villas

• Existing offices

• Shops

• Existing buildings

Always verify system compatibility.

Step 4: Check Alarm Panel Compatibility

Before ordering, check:

• Alarm-panel model

• Wired-zone requirements

• Wireless protocol

• Supported devices

• Power requirements

• Zone configuration

A wireless sensor should not be assumed to work with every wireless alarm panel.

Step 5: Check the Door or Window Type

Consider whether the opening is:

• Wooden

• Aluminum

• Metal

• Sliding

• Hinged

• Large commercial door

• Standard window

• Sliding window

Installation requirements can vary.

Step 6: Check the Sensor Gap

Magnetic contacts have installation tolerances.

The magnet and sensor must normally remain within the supported alignment and gap when the door or window is closed.

Check the manufacturer's exact specifications.

Step 7: Consider Wireless Range

For wireless sensors, consider:

• Distance to alarm panel

• Walls

• Floors

• Concrete

• Metal structures

• Building size

• Interference

• Device location

Actual indoor wireless performance depends on the installation environment.

Step 8: Check Battery Requirements

Wireless sensors typically require batteries.

Before purchasing, check:

• Battery type

• Battery quantity

• Low-battery indication

• Replacement procedure

• Expected battery performance

Battery life varies according to product and usage.

Step 9: Consider Wi-Fi or Smart Functions

Some smart Door and Window Sensors can connect through Wi-Fi or a compatible smart hub.

Depending on the system, supported features may include:

• Open/close notifications

• Device status

• Mobile alerts

• Automation

• Event history

• Smart-home integration

Check whether a separate gateway or hub is required.

Step 10: Plan Security Zones

Multiple sensors can be organized into zones on compatible alarm systems.

For example:

Zone 1 – Main Entrance
Zone 2 – Ground-Floor Windows
Zone 3 – Rear Door
Zone 4 – Storage Room
Zone 5 – Emergency Exit

Zone planning helps users identify where an alarm event originated.

Step 11: Combine with Other Sensors

Door and Window Sensors should not necessarily be the only security devices.

A more complete system can include:

Door/Window Sensors + Glass Break Detectors + PIR Motion Detectors → Alarm Panel → Siren + Notification

Each sensor monitors a different type of event.

Step 12: Test the Installation

After installation, test:

• Open state

• Closed state

• Alarm-panel response

• Zone identification

• Wireless communication

• Mobile notification where supported

• Tamper function where available

Every installed sensor should be tested.

Step 13: Maintain the Sensors

Regularly inspect:

• Physical alignment

• Mounting

• Wiring

• Battery

• Wireless communication

• Alarm-panel status

Replace batteries and damaged components according to manufacturer guidance.

Wired Door Sensor

Wired magnetic contacts can be used with compatible wired alarm panels.

They are commonly considered for:

• New construction

• Offices

• Shops

• Warehouses

• Factories

• Commercial buildings

Advantages can include permanent physical communication without individual wireless sensor batteries, depending on the system design.

Proper cabling and installation are required.

Wireless Door Sensor

Wireless Door Sensors communicate with compatible alarm panels or hubs.

They can be suitable for:

• Homes

• Apartments

• Villas

• Offices

• Shops

• Existing buildings

Check:

• Wireless protocol

• Communication range

• Battery

• Alarm-panel compatibility

• Installation gap

Wireless Window Sensor

Wireless Window Sensors provide similar functionality for suitable windows.

They can be useful when running new alarm wiring is difficult.

Always verify:

• Sensor dimensions

• Window design

• Magnet alignment

• Wireless range

• Battery status

• System compatibility

Wi-Fi Door Sensor

A Wi-Fi Door Sensor can provide smart connectivity depending on the model.

Supported functions may include:

• Door-open notification

• Door-close notification

• Mobile app alerts

• Event history

• Smart automation

Some models connect directly to Wi-Fi, while others require a compatible hub or gateway.

Check the exact product specification.

Smart Door and Window Sensor

Smart sensors can be integrated into supported security or automation ecosystems.

Possible applications include:

Door Opens → Mobile Notification

or

Window Opens → Smart Automation

Available automation functions depend on the platform, hub, and compatible devices.

Door Sensor with Intruder Alarm System

Door Sensors are fundamental components of many Intruder Alarm Systems.

A typical system can be:

Door Sensor + Window Sensor + PIR Detector + Glass Break Detector → Alarm Panel → Siren

This provides several detection layers.

For example:

Door Opens → Door Sensor

Window Opens → Window Sensor

Glass Breaks → Glass Break Detector

Movement Detected → PIR Detector

The Alarm Control Panel manages the responses according to its configuration.

Door Sensor with CCTV

Door Sensors can also complement CCTV.

A complete security design can include:

Door/Window Sensors + Intruder Alarm + CCTV + Access Control

Each technology has a different role.

Door/Window Sensor: Monitors selected openings.
Intruder Alarm: Processes sensor events and alarm responses.
CCTV: Provides video monitoring and recording.
Access Control: Manages authorized entry.

Door Sensor vs PIR Motion Detector

These devices have different functions.

Door Sensor:
Monitors the open/closed state of a selected door.

PIR Motion Detector:
Detects movement within its designed coverage area.

Using both can provide more comprehensive intrusion detection.

Window Sensor vs Glass Break Detector

These sensors also perform different tasks.

Window Sensor:
Monitors whether a protected window is opened.

Glass Break Detector:
Monitors specific characteristics associated with glass breakage according to its sensing technology.

For selected locations, both can be used.

Factors Affecting Door Sensor / Window Sensor Price

Several factors can influence the final cost.

Sensor Type

Standard magnetic contacts and smart sensors can have different specifications.

Wired or Wireless

Wireless models require compatible communication technology and batteries.

Communication Protocol

Wireless security ecosystems may use specific proprietary or standardized protocols.

Smart Features

Wi-Fi, mobile notifications, automation, and app functions can affect product selection.

Alarm Panel Compatibility

Some systems require manufacturer-specific sensors.

Quantity

Large villas, offices, warehouses, and commercial buildings may require many sensors.

Installation

Mounting, wiring, programming, testing, and commissioning can affect the project cost.

Complete Security System

A complete project can also include:

• Alarm Control Panel

• PIR Detectors

• Glass Break Detectors

• Sirens

• CCTV

• Access Control

• Backup power

Buy Door Sensor / Window Sensor in Saudi Arabia

Customers searching for Door Sensor / Window Sensor Price in Saudi Arabia, Wireless Door Sensor Saudi Arabia, Magnetic Door Contact Saudi Arabia, Window Alarm Sensor Saudi Arabia, or Smart Door Sensor Saudi Arabia can explore available security solutions through Unity International Services LLC.

Before ordering, provide:

• Property type

• Number of doors

• Number of windows

• Door/window material

• Existing alarm panel

• Wired or wireless requirement

• Smart/Wi-Fi requirement

• Required quantity

• Installation location

This information can help identify an appropriate sensor solution.

Door Sensor / Window Sensor Supplier in Saudi Arabia

Unity International Services LLC provides security and technology solutions for residential, commercial, and institutional projects across Saudi Arabia.

Customers can inquire about Door and Window Sensors for:

• Homes

• Apartments

• Villas

• Offices

• Shops

• Warehouses

• Factories

• Hotels

• Schools

• Restaurants

• Commercial buildings

Confirm current specifications, system compatibility, availability, quantity, installation requirements, and quotation before ordering.

Frequently Asked Questions

What is the Door Sensor / Window Sensor price range?

The specified category price starts from 350 SAR and can reach 4,500 SAR, depending on sensor technology, quantity, wired/wireless configuration, smart functions, compatibility, and project requirements.

What does a Door Sensor do?

It monitors the state of a selected door and can send a signal to a compatible alarm system when the state changes.

What does a Window Sensor do?

It monitors the open or closed state of a selected window according to the sensor and system configuration.

What is a magnetic contact?

A magnetic contact commonly uses a sensor and magnet to identify whether a door or window is in the expected closed position.

Are wireless Door Sensors available?

Yes. Wireless sensors are available for compatible alarm panels and smart-security systems.

Can I receive mobile notifications?

Supported smart Door/Window Sensors can provide mobile notifications through a compatible Wi-Fi, hub, alarm panel, or application.

Is a Window Sensor the same as a Glass Break Detector?

No. A Window Sensor typically monitors opening or closing, while a Glass Break Detector is designed to detect specific characteristics associated with glass breakage.

Can Door Sensors work with an Intruder Alarm System?

Yes. Door and Window Sensors are commonly used as part of compatible Intruder Alarm Systems.

Where can I buy Door and Window Sensors in Saudi Arabia?

Customers can contact Unity International Services LLC for Door Sensors, Window Sensors, Intruder Alarm Systems, PIR Detectors, Glass Break Detectors, sirens, CCTV, Access Control, and related security solutions.

Order Door Sensor / Window Sensor in Saudi Arabia

When selecting Door and Window Sensors, consider the complete security system:

Door Sensor + Window Sensor + Glass Break Detector + PIR Detector + Alarm Panel + Siren

Prices within this category start from 350 SAR and can reach 4,500 SAR, depending on sensor technology, quantity, communication method, smart features, alarm-panel compatibility, installation, and availability.

Explore Door Sensors, Window Sensors, and professional intrusion-detection solutions from Unity International Services LLC for homes, villas, offices, shops, warehouses, factories, hotels, and other projects across Saudi Arabia.